Causes And How To Fix The Bluetooth Speaker Constantly Disconnecting And Stuck Sound

When Bluetooth speakers are used, they frequently become disjointed and choppy. This is a fairly regular problem with Bluetooth speakers. The topic today is, Causes And How To Fix The Bluetooth Speaker Constantly Disconnecting And Stuck Sound. Continue reading the article below by Casual Living USA.

1. The reasons for the Bluetooth speaker constantly disconnecting and stuck sound

Some of the most common causes of sound disruption or Bluetooth speaker disconnection are as follows:

  • You’ve probably left too much space between the source device (say, your smartphone, laptop, or TV) and the speaker, making it difficult for the two devices to interact.
  • As part of the process of using the speaker, you have positioned the speaker in regions where there are numerous obstructions that affect the conveyed signal.
  • There could be an issue with the Bluetooth functionality of your phone, laptop, or another device, or there could be a problem connecting the devices together.
  • Your Bluetooth speaker has seen a lot of use over the years, which has worn it down and caused it to become damaged.
Bluetooth speaker

Here are some ways to keep your Bluetooth speaker in good working condition:

  • Maintain cleanliness: Using a soft, dry cloth, wipe off the speaker’s outside. If there is dirt or filth, gently wipe it away with a damp cloth. Avoid using abrasive or harsh substances that can damage or harm the surface of the speaker.
  • Keep it away from water and moisture: Because Bluetooth speakers are not always waterproof, keeping them away from water and moisture is crucial. If you use your speaker outside, keep it covered or in a protected place to avoid becoming wet.
  • Avoid overcharging: Overcharging may damage the battery of your Bluetooth speaker. When it has been fully charged, make sure to disconnect it. Most Bluetooth speakers include an in-built feature that prohibits charging once the battery has been fully charged.
  • Avoid exposing your Bluetooth speaker to extreme temperatures: Avoid exposing your Bluetooth speaker to extreme heat or cold, since this may cause internal components to fail. It should not be left in a hot automobile or near a heat source, and it should not be exposed to temperatures below freezing.
  • Use the correct charger: Only use the charger that comes with your Bluetooth speaker or one recommended by the manufacturer. Using a different charger may cause harm to the battery or internal components.

By following these rules, you can ensure that your Bluetooth speaker stays in good working condition and delivers high-quality sound for an extended length of time.

2. How To Fix The Bluetooth Speaker Constantly Disconnecting And Stuck Sound

Step 1: Assess whether the distance between the two devices is too great. If this is the case, situate the speaker as close to the source of the sound as possible, preferably within 10 meters.

You should also avoid placing your speakers near anything that could cause interference or in an area with a lot of barriers. If this is the case, you should move them so that the speakers can communicate more effectively.


Step 2: Requires you to confirm that the device is still connected to the speaker. This is vital since the speaker and your smartphone can become separated while in use, allowing someone close to connecting their device to your speaker by mistake. Friend.

In this scenario, switch off the speaker or the device’s Bluetooth capabilities (if either is accessible) and then re-enable them. After that, you must check the Bluetooth state of your transmitter and link it again.

Bluetooth capabilities

Step 3: If you have exhausted all of the preceding techniques and the speaker remains disconnected or the sound has ceased, you may look into some of the possible causes of the problem utilizing the following remedies:

  • The computer driver is faulty. This issue can be resolved by reinstalling the Driver.
  • Bluetooth failure on a phone or television. Next, you switch off both the speaker and the source, then reconnect them and pair them again. If the problem persists, you should reset your phone or television to factory settings.
Red Mozard
  • In some cases, the speaker may also have a Bluetooth problem, so switch it off and on again before pairing it with another laptop or phone device (to check the Bluetooth connection function on the speaker). If you attempt connecting with many devices and are still unable to do so, the speaker may be faulty; please bring it in for repair or purchase a new one if needed!
  • In addition, there are times when the speaker is malfunctioning and does not receive any input signal. Connect the speaker to a memory card, USB (through USB port, memory card port – if available), or a phone, desktop, TV, or laptop via the AUX connection socket to test it (using an audio cable). 3.5mm jack bar (one end into the AUX port on the speaker, the other into the headphone port on the transmitter).

3. Some things to think about while connecting Bluetooth speakers

Keep the following criteria in mind to optimize speaker connectivity and avoid blocked or disconnected speakers:

While listening to music, keep the speaker and source device as near together as possible: most Bluetooth speakers can only play within a 10 m radius.

Use the appropriate power: Most Bluetooth speakers may rapidly fail if used at full power for a lengthy amount of time.

Set the speaker to around 80% of its maximum volume to maintain it in good condition and use it for a long period. Turning on everything at once causes your speakers to crackle and the quality of your music to suffer; more importantly, it impairs your hearing.

JBL Bluetooth speaker

To maintain durability, charge and utilize batteries in line with industry standards: To keep batteries out of bottles and extend their life:

  • When you first receive the speaker, fully charge the battery for 8-10 hours before using it, and then repeat this process three times to make the battery more stable.
  • If the speaker has recently reported a low battery, you should charge it since the speaker will have trouble receiving power if the remaining battery is very low or completely expended.
    If you need to use a Bluetooth speaker regularly, look for one with a long enough battery life to give an uninterrupted listening experience.
  • Charging and listening at the same time will harm the device and endanger the user. Listening to music while charging causes the speaker’s battery to overheat, which might result in an explosion.
Sony bluetooth speaker


There might be a number of causes for your Bluetooth speaker to continually disconnecting and producing a stuck sound. Low battery levels, outdated firmware, signal interference, and software problems are all common causes. Another possibility is that the Bluetooth speaker is too far away from the device to which it is connected, or that physical obstructions are interfering with the signal.

There are several fixes you may try if your Bluetooth speaker is regularly disconnecting and generating a stuck sound. Before begin, make sure the battery is completely charged and the firmware is up to date. Bring the speaker closer to the device to which it is connected, and remove any physical obstacles that may be obscuring the signal. You might also try disabling any other Bluetooth devices that could be interfering with the connection. If none of these options work, consider resetting the speaker or reverting it to its factory settings.

The method for resetting a Bluetooth speaker differs depending on the brand and kind of device. In general, you should be able to reset the speaker by pressing and holding the power button for a predetermined period of time (e.g. 10 seconds). For more information on how to reset the speaker, consult the user manual or contact the manufacturer.

The technique for restoring a Bluetooth speaker to factory settings may change based on the brand and kind of device. In general, you may be able to restore the speaker’s factory settings by hitting a combination of buttons or by using a manufacturer-supplied app. See the user manual or contact the manufacturer for specific instructions on how to restore the speaker to its factory settings.

If your Bluetooth speaker still does not work after trying the solutions suggested above, you should contact the manufacturer for further assistance or consider purchasing a replacement speaker if it is still under warranty. You might also check to see if the issue is with the device to which you are connecting the speaker, since it may have a Bluetooth connectivity issue.

Through this article, Casual Living USA hopes you can get more useful information about the Causes And How To Fix The Bluetooth Speaker Constantly Disconnecting And Stuck Sound. Have a nice shopping experience!

Vincent Mason

Vincent Mason sells speaker and audio devices for home and small civil works and has 15 years of experience. He is a US-based expert. Vincent is a well-groomed, early-forties man. His warm, approachable nature helps him connect with consumers and develop enduring connections. Vincent is a good salesman who knows his products and consumers. He's good at matching products to customers' needs and budgets. Vincent spends his free time researching audio technologies and market trends. He loves music and attends concerts and festivals whenever possible.

Recent Posts